How to Make your own candles

You will need 

Paraffin wax, or scraps of left over candles.
Crayons (for colour), or candle dye.
A strand of candle wick (craft store)
Small coffee can, or small metal container.
Small pot.
Heat-proof containers, (such as small glasses,

Cooking spray. (to coat inside of mold)
Toothpicks
Funnel. (Optional, but makes it easier)
Wooden spoon. (To stir the wax with)
Wax paper or foil. (To catch wax drippings)
Wick tabs (wick tabs are the small metal tabs that are used in candle making.)
Herbs, stones, and oils. (optional)

How to make your candles
Place wax inside coffee can.
Place coffee can inside pot.

Fill pot with water until you reach half way up the outside of the can.
Heat the pot of water until the wax melts. DO NOT TURN HEAT UP TO FAR, WAX CAN CATCH ON FIRE! (at this time, add crayon or wax colouring until you've reached your desired colour.)

After wax and colour is completely melted, turn off the heat. Remember to stir your wax every so often.
Spray cooking spray inside your containers.

Cut off a length of wick and attach it at the bottom of your container with a wick tab.
Wrap the top of the wick around a toothpick and support it on top of the container.

Now is the time to add your herbs, stones, or oils if you desire.
Be sure to place wax paper or foil under your work area before pouring you candles. Wax is not fun to scrape off of surfaces.

Pour the wax into the containers using your funnel.
After you have poured as many candles as you want, let them sit for 4-6 hours before attempting to remove them from the containers. (If you are having trouble getting the candles out of the containers, I discovered they will release easier by putting them into the freezer for approx. half an hour.

After removing the candles from the containers, wipe away the oily substance and let them sit for at least another 3-4 hours to dry.
If you have left over wax in your coffee can, allow it to cool, then put a lid on it and store it away until next time.

Making Taper candles

Just follow the directions above, and instead of pouring the wax into molds, do this:

Start with a long piece of wick - twice the size of your desired candle length plus 3 inches (you will be making 2 candles at once). Bend the wick in the middle and hold it by the bend. Dip the wick into the wax and then lift back out. Getting started is the hardest because the wick will float on top of the wax until it has enough wax on it to weigh it down. Allow it to get completely cold between dipping's when you first start.

After your candle has started to take shape you can speed up the process a little. I keep a pan of cool water nearby and dip the candles in the water after each dipping in the wax. While this speeds up the process a little, candle making is a slow process but very well worth the time and energy you put into it.

Keep dipping the candles and allowing them to cool and then dip again. When you have achieved the proper size, hang them to dry until the wax has set but the candles aren't too hard. Then roll them on the wax paper to smooth out the shape. Once the candle shape is too your liking, dip 1 or 2 more times to make sure your candle is smooth. Trim off any excess wax to make a bottom with a sharp knife. Cut the wick and hang your candles to dry.